BXTHR - 20-3046, SILICON MOLD RELEASE

  • MSDS: BXTHR
  • Manufacturer: BUEHLER LTD
  • Product Name: 20-3046, SILICON MOLD RELEASE
  • National Stock Number: 6850-00-630-9691
Product Identification

Product ID:20-3046, SILICON MOLD RELEASE
MSDS Date:01/16/1995
FSC:6850
NIIN:00-630-9691
MSDS Number: BXTHR

Responsible Party
BUEHLER LTD
41 WAUKEGAN RD
LAKE BLUFF, IL 60044
US

Emergency Phone: 708-295-6500

Info Phone: 708-295-6500

Cage: 09410

Contractor
BUEHLER LTD.
LAKE BLUFF, IL 60044-1687 US

Telephone: 847-295-8500

Cage: 09410

Ingredients

METHYLENE CHLORIDE

CAS: 75-09-2

RTECS: PA8050000

Fraction By Weight: 72%

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


POLY (DIMETHYLSILOXANE)

CAS: 63148-62-9

RTECS: JJ6484500

Fraction By Weight: 30 - 40%


1,1,1,2-TETRAFLUOROETHANE

CAS: 811-97-2

Fraction By Weight: 25%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:DIZZINESS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:DIZZINESS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid

First Aid:INHALATION-REMOVE FROM EXPOSURE IMMEDIATELY. IF BREATHING
STOPPED, BEGIN ARITFICIAL RESPIRATION & ADMINISTER OXYGEN
EYES-FLUSH WITH WATER FOR 15 MINUTES & APPLY MINERAL OIL.
SKIN-REMOVE ALL CONTAMINAT ED CLOTHING. WASH WITH SOAP AND WATER.
INGESTION-DRINK A LOT OF WATER. DO NOT INDUCE VOMITING. (SEE A
PHYSICIAN IN ALL THE ABOVE EMERGENCIES.)

Fire Fighting

Flash Point:NONE
Lower Limits:N/L
Upper Limits:N/L
Extinguishing Media:USE WATER FOG.
Fire Fighting Procedures:SELF-CONTAINED RESPIRATORY EQUIPMENT.
Unusual Fire/Explosion Hazard:DECOMPOSITION, THIS WILL GIVE HALOGENS
AND ACIDS.

Accidental Release

Spill Release Procedures:VENTILATE AREA, REMOVE ALL SOURCES OF
IGNITION. CLEAN WITH INERT MATERIAL.

Handling

Handling and Storage Precautions:STORE AT ROOM TEMPERATURE. TREAT AS
COMPRESSED AGS.
Other Precautions:NONE

Exposure Controls

Respiratory Protection:SHOULD BE IN ACCORDANCE WITH 29CFR 1910.134.
Ventilation:MECHANICAL-RECOMMENDED.
Protective Gloves:POLYETHYLENE TYPE.
Eye Protection:PROTECTIVE GLASSSES.
Other Protective Equipment:NONE
Work Hygienic Practices:GOOD PERSONAL HYGIENE TO BE FOLLOWED AT ALL
TIMES.
Supplemental Safety and Health
NONE

Chemical Properties

HCC:V2
Vapor Pres:30 PSIG
Vapor Density:1+
Spec Gravity:1+
Evaporation Rate & Reference:14.50 (ACE=1)
Solubility in Water:NONE
Appearance and Odor:CONC. CLEAR CHLORINATED SOLVENT ODOR.
Percent Volatiles by Volume:97

Stability

Stability Indicator/Materials to Avoid:YES
HIGHLY REACTIVE METALS.
Stability Condition to Avoid:HEAT OVER 130 DEGREES F.
Hazardous Decomposition Products:HALOGENS, HALOGEN ACIDS.

Disposal

Waste Disposal Methods:DO NOT PUNCTURE OT INCINERATE. DISPOSE OF IN
ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS. EMPTY
CONTAINERS MAY BE DISPOSED OF THROUGH NORMAL CHANNELS. FULL OR
PARTIAL CONTAINERS ARE CONSIDERE D HAZARDOUS WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.